|
Product Details:
|
| Voltage: | 220v And Can Be Customized, 12- 660v | Core Components: | Silicone Heater |
|---|---|---|---|
| Wattage Density: | 0.1- 1.5w/cm2 | Withstand Voltage: | 2000V/min |
| Minimum Size: | 30*50 Mm | Thickness: | 1.5MM |
| High Light: | 12v 3D Printer Heater,660v 3D Printer Heater,50mm 3D printer silicone heated bed |
||
Silicone Rubber Heater Pad With Sensor For 3D Printer
Kapton insulated heaters are available in a variety of shapes, sizes, and wattages. Polyimide Film offers a high degree of resistance to chemicals, and has excellent outgasing properties in high vacuum environments. Polyimide is an organic polymer with very high dielectric capability and thin profile, while providing superior resistance to most solvents, oils, and radiation. In connection with these features, kapton heater is very ideal for applications with space and weight limitation, or where the heater will be exposed to chemical or oil. Kapton heater also allows easy visual inspection on the internal structures. Pressure-sensitive adhesive (PSA) backing surface is standard, but special adhesives or mounting holes can be customized as customer requirement.
3D Printer Heater Details
| Temperature range | -40.00~180.00°C |
| Electric resistance precision | ±10%( bigger value selected) |
| Power density | 0.10~1.50w/cm² |
| Mechanical pressure | 100.00kg/cm² |
| Minimum bending radius | 3.20mm |
| External insulation material | Silicone glass fiber |
| Internal heating element | Ni-Cr alloy |
| Thickness | 1.5mm-3mm(With 3M) |
| Voltage | 3.7-660V |
3D Printer Heater Temperature controller
* Surface Sensing Thermostats
* Adjustable Thermostats dial or digital
* Thermocouples (K, J or PT100 etc)
* Thermistor
* Thermal Protector
3D Printer Heater Features
1. Thinness, lightness, sticky and flexibility
2. Improve heat transfer, accelerate warming and decrease power under the process of operation
3. Heat fast and high thermal conversion efficiency
Performance Capabilities for Blanket Heater
1. Operating temperatures up to 430°F (220°C)
2. Watt densities up to 0.1W/cm 2,dependent upon application temperature
3. Wire-wound element thickness - 0.055 in. (1.5 mm)
4. Etched foil element - 0.022 in. (0.56 mm)
5. Waterproof and non-toxic(Waterproof grad:IP68)
Contact Person: sales
Tel: 17712367672
